NavNet MFDs
Radars
Fish Finders & Transducers
GPS & Chart Plotters
Autopilots
Navigation
Sonars
CommercialDRS CAN Bus port detail
Question
Is the CAN Bus port on the NavNet 3D DRS antenna a standard NMEA2000 Port?
Solution
Technically, the answer is no. Only Furuno, or Furuno approved NMEA2000 products may be connected to the CAN Bus Port on a DRS antenna. Memory limitations do not allow the DRS antenna to support every NMEA2000 PGN, especially proprietary PGN's that may be required to program and configure other manufacturer's sensors. Not all DRS scanners have this port.