OverviewFeaturesAccessoriesManuals & DocsTech Info
The Furuno CSH5MK2 is a cost-effective multi-beam color scanning sonar. It displays the underwater situation in 360 degrees around your vessel, showing echoes in 16 colors on a 14" color CRT display.
There are four basic display modes: Normal, Normal + Text, Normal + Echo Sounder and Normal + Signal on R/B mark. In the Normal + E/S mode, you can instantly see where the target is located relative to your vessel.
Frequently used functions such as EBL/VRM, Auto Tilt, Off-center, Range, Gain, Event Marks are selected by simply pressing touchkeys on the remote controller. TX output, Pulselength, TX cycle and TVG are set by menu selection for operation flexibility.
In addition, the CSH5MK2 has a trilingual menu display selectable from English, Spanish and Danish for more user-friendly operation.
When connected with appropriate sensors such as GPS, heading sensor/gyro and E/S together with an optional interface board, the CSH5MK2 displays own ship's position, speed, course, heading, and water temperature.
Fishing Features
- 14 Inch High Resolution, Non-Glare CRT Display, 512(H) x 384(V) Dots
- Targets Shown in 16 Colors, including White, Screen Marks in 2 Colors
- 15 Display Ranges from 0-85 Through 0-1600 meters Off Centering
Extends the Maximum Range to 2560 meters
- Rapid Trackball Control of Cursor Mark, Fish Alarm, EBL and EVRM
- F1, F2 Function Keys for Single Touch Optimized Fish Detection
- Audio Search Sectors of 20, 40, 80 or 120 Degrees Aligned to Bearing Mark
- Automatic Target Lock, Mark and Tracking of Selected Fish School
Display Presentation Modes
- Normal PPI Display Mode with Fishing Plotter * with English or Spanish Data on Screen*
- Normal PPI Display Plus, Vertical Echo Sounder Display *Targets at the R/B Mark Position
Ultra Sonic, Soundome and Hoist Unit Features
- High Power Transmitter with 11 Step Power Reduction for Shallow Water Use
- Efficient Soundome Design, using Multi-Element Phased Transducer Arrays
- Transmit Beam Angle of 360 degrees (H) x 10 degrees (V);
Receive Beam Angle of 8 degrees (H) x 11 degrees (V)
- Select Wider Transducer Vertical Beam Angle to Broaden Search Area
- Select a Narrower Transducer Beam Angle for Sharper Bearing Discrimination
- Uses a Steel or FRP, 216 mm I.D. Hull Retraction Tank, with Flange, 750 mm Long
- Sensor Stabilized Transducer to Correct Picture for Vessel Roll and Pitch *
- Automatic Transducer Tilt Scan in 2 Degree Steps, 0 to 26 degrees (down)
- Automatic Sector Scan, 2 Degree Steps, Preset to 10, 20, 40, or 60 degrees
- Manual Transducer Tilt Adjustment in 1 Degree Steps, 0 to 55 degrees (down)
- 20 Second Hoist Raise or Lower Time at up to 16 Knots, Operation to 18 Knots
Power Requirements
- 110 or 220 VAC, 50/60 Hz, single phase, 1 KVA maximum
Notes
- * Optional CSH5060 unit and data Input required
- Hull tube is not included in system price
|
Model / Part #
|
|
MSRP - USD
|
|
006-976-440
|
Rx Cable Assembly, Transceiver to Pre-Amplifier (Cable #2), 10 Meters
|
$2,195.00
|
|
006-976-450
|
Rx Cable Assembly, Transceiver to Pre-Amplifier (Cable #2), 15 Meters
|
$2,795.00
|
|
006-976-460
|
Cable Assembly, Transceiver to Pre-Amplifier (Cable #1), 10 Meters
|
$595.00
|
|
006-976-470
|
Cable Assembly, Transceiver to Pre-Amplifier (Cable #1), 15 Meters
|
$795.00
|
|
006-976-580
|
Cable Assembly, Display/Processor to Transceiver (S10-6-15), 15 Meters
|
$695.00
|
|
006-976-590
|
Cable Assembly, Display/Processor to Transceiver (S10-6-30), 30 Meters
|
$1,095.00
|
|
006-976-600
|
Cable Assembly, Display/Processor to Transceiver (S10-6-50), 50 Meters
|
$1,795.00
|
|
006-976-610
|
Cable Assembly, Transceiver to Pre-Amplifier (Cable #1), 5 Meters
|
$495.00
|
|
006-976-620
|
Rx Cable Assembly, Transceiver to Pre-Amplifier (Cable #2), 5 Meters
|
$1,895.00
|
|
000-559-160
|
Bulk Multi-Purpose Cable, 250V-DPYC-1.25, use for AC Power (Sold & Priced by Meter)
|
$0.00
|
|
000-560-450
|
Bulk Multi-Purpose Cable, RW4864, Special Order (Sold & Priced by Meter)
|
$15.00
|
|
Model / Part #
|
|
MSRP - USD
|
|
008-423-420
|
Display, Side Handgrip Set (Two Piece Set)
|
$95.00
|
|
AD100
|
Gyro Analog to Digital Converter, Digital Heading Repeater (External)
|
$1,395.00
|
|
BFEG1500
|
Color Sonar Target Simulator
|
$1,095.00
|
|
BS704
|
Clinometer with 10 Meter Cable Assembly
|
$1,695.00
|
|
CSH5060
|
Internal Mount Nav Data and Sounder Interface
|
$1,895.00
|
|
CSH5SHAFT/2
|
2350mm Stainless Steel Soundome Shaft
|
$2,875.00
|
|
OME-129-90Z
|
Operator's Manual, CSH5MK2
|
$17.95
|
|
OSE-129-90Z
|
Operator's Guide, CSH5MK2
|
$5.00
|
|
TUBE/F1901
|
FRP Hull Tube, 190mm ID x 1m L.O.A.
|
$1,900.00
|
|
TUBE/F1918
|
FRP Hull Tube, 190mm ID x 1.8m L.O.A.
|
$2,100.00
|
|
TUBE/S1901
|
Steel Hull Tube, 190mm ID x 1.0m L.O.A.
|
$1,700.00
|
|
TUBE/S1918
|
Steel Hull Tube, 190mm ID x 1.8m L.O.A.
|
$1,950.00
|
|
TUBE/S1935
|
Steel Hull Tube, 190mm ID x 3.5m L.O.A.
|
$4,350.00
|
|
VI1100A
|
External Echosounder Interface Unit
|
$525.00
|
|
IME-129-90Z
|
Installation Manual, CSH5MK2
|
$17.95
|
|
006-970-810
|
Waterproof Shaft-Top Attachment Set
|
$413.00
|
Prices and Specifications Subject to Change Without Notice
|
|